Indoor and Outdoor, P1.9 to P6.9, share the same cabinet frame, control box and accessories.
Stacking, hanging, or wall mounted, flat or curved. One (M series) for All your requirements.
Parameter
M Series Indoor
MI 1.9
MI 2.2
MI 2.6
MI 2.9
MI 3.9
MI 4.8
Pixel Pitch(mm)
1.9
2.2
2.6
2.9
3.91
4.81
Pixel Matrix Per Sq.m
262144
200704
147456
112896
65536
43264
Pixel Configuration
SMD1010
SMD1010
SMD2020
SMD2020
SMD2020
SMD2020
Brightness (nits)
750
750
1500
1000
1200
1200
Scan
1/32
1/28
1/16
1/14
1/16
1/13
Cabinet Resolution
256x256
224x224
192x192
168x168
128x128
104x104
Rotation Angle
n/a
n/a
-3° and +3°
-5° and +5°
-5° and +5°
-8° and +8°
Power Con. (Max / Avg)
680/227 w/sq.m
712/238 w/sq.m
784/262 w/sq.m
784/262 w/sq.m
600/200 w/sq.m
608/202 w/sq.m
Module Dimension
250x250mm / 0.82x0.82ft
Cabinet Weight
8kg / 17.6Ib ( Die-casting Aluminum)
Cabinet Dimension
500x500x87mm / 1.64x1.64x0.29ft
Service Access
Front / Rear
Refresh Rate (HZ)
≥3840
Grey Scale (bit)
16
Viewing Angle (H/V)
160 / 160
IP Rate
IP40
Input Voltage (AC)
110V / 240V
M Series Outdoor
MO 3.9
MO4.8
MO 5.9
MO 6.9
Pixel Pitch(mm)
3.91
4.81
5.95
6.94
Pixel Matrix Per Sq.m
65536
43264
28224
20736
Pixel Configuration
SMD1921
SMD2727
SMD2727
SMD3535
Brightness (nits)
5000
5500
5500
5500
Scan
1/16
1/13
1/7
1/6
Cabinet Resolution
240x240
192x192
160x160
120x120
Rotation Angle
-2° and +5°
-2° and +8°
-10° and +10°
-10° and +10°
Power Con. (Max / Avg)
720/240 w/sq.m
744/248 w/sq.m
640/213 w/sq.m
624/208 w/sq.m
Module Dimension
250x250mm / 0.82x0.82ft
Cabinet Weight
8kg / 17.6Ib ( Die-casting Aluminum)
Cabinet Dimension
500x500x87mm / 1.64x1.64x0.29ft
Service Access
Front / Rear
Refresh Rate (HZ)
≥3840
Grey Scale (bit)
16
Viewing Angle (H/V)
160 / 160
IP Rate
IP65
Input Voltage (AC)
110V / 240V
* Specifications and photos are subject to change without prior notice.
Full Front Maintenance
Not only module front service, but also power supply, receiver card, hub, etc.
Disassemble modules by front maintenance tool
Loose set screw to disassemble complete control box
Time Saving
Remove the LED modules without disconnect cables, it will save a lot of time in the show.
How to Set Safety Stock & Save Material Cost?
Different LED display pixel pitch match the same cabinet frame, control box, power supply, data and power cable, flight case packing, etc.
So you only need buy different pixel pitch modules to upgrade your screen resolution.
Saving Shipping Cost & Tax Cost
LED modules weight and volume is much lower than cabinet. So it will save shipping cost and tax cost.
Wall Mounted for Fixed Installation
Each corner of cabinet have a screw hole, screw M8 bolts to fix bare cabinet on the wall.
Assembly modules onto the cabinet.
Each corner of cabinet has a screw hole, screw the M8 bolts to fix bare cabinets on the wall.
Assemble modules onto the cabinet in order.
Curved Installation
Curved with every 2.5°between -7.5°and 10°, which can make convex and concave.
Climbing Support
Climbing structure can help you make convenient maintenance
Edge-care Design
4mm stands at the bottom of cabinet, prevent edge pixels damage when put cabinet upright on the ground.
No Light Leakage Trouble
No light leakage design with specific strips on side of cabinet and behind neighbour module.
Say NO to Reversed Mounting
Different spacing of location pins on up and down sides of control box.
Our website uses cookies to enhance the experience of users. By clicking“Accept" you are agreeing to our use of cookies.
See our Privacy Policy to learn more.